We were called upon by a condo building manager in San Francisco to remove their old commercial water tank lining, perform tank linings repair and surface preparation, and reapply a new tank lining.
Coatings Approved at CA Regulated Agencies – Meets CA VOC Regulations Read more »
There are some common issues that can arise with fire water tanks and the linings that warrant swift attention. These types of repairs merit the attention of a professional- do not try to go it alone. To prevent these kinds of problems in the future, rely on routine inspections and regular maintenance from a qualified technician who has experience with fire water tank repairs San Francisco– the type of storage tanks used for structural fire suppression. Read more »
Steel Tank Repair – Tank Lining in San FranciscoWe installed a new epoxy liner for our client in the Bay Area. Check out our presentation below showing the steps involved in repairing tank linings. Read more »
Tank Name/Contents- Sodium Hypochlorite FRP Tank Linings
Table of Contents
1 Definitions 3
2 Scope and methods 3
3 Summary of Issues & Recommendations 4
4 Barcol Hardness Measurements (ASTM D 2583) 11
5 Appendix A: General Information on FRP 13
6 Appendix B: Conversion Curves for Barcol Values 18
7 Appendix C: Drawings, Name Plate, Labels 19
8 Appendix D: Additional Pictures from the inspection 21
9 Appendix E: Repair Methods to reline FRP Tank surfaces (i.e. replace 100 mil thick corrosion barrier) – a brief outline 23
10 Appendix F: Detailed Repair Procedure to reline FRP Tank surfaces 24
11 Appendix G: Severe Cases of Chemical permeation and resin degradation 27
12 Appendix H: In-place Dome Replacement with Structural MRM layers 31 Read more »
Sure, there are some common issues that come with steel tanks and tank linings that simply cannot be avoided. The key is to get tank repairs and tank liner repairs right away- before small issues can grow into major problems. Read more »
Metal storage tanks are extremely susceptible to corrosion, and there will come a time when they will need to be repaired or replaced. Replacing a storage tank is sometimes unavoidable, but it is also a much more costly option. In most cases, it’s best to stick with water tank repair unless the bottom of a tank is no longer salvageable. This usually involves installing new water tank liners, which have evolved over the years to be far stronger and more resistant to heat and corrosion than they’ve been in the past. This is largely thanks to FRP. Read more »
Steel and concrete tanks have always been used to store potable water and other liquids, which means corrosion has always been an issue. In the past, companies have tried to prevent corrosion and avoid costly water tank repairs by lining tanks with materials such as lead-based paint, vinyl, and coal tar epoxies. These days, most companies use fiberglass-reinforced polymer, or FRP, for their water tank liners. FRP was introduced in the 1950s as a way to repair tank bottoms that had corroded. The material could not only bridge gaps that had formed in the bottoms of tanks, but they provided protection from internal corrosion as well. This made FRP wraps useful in tanks that were being used to contain more caustic chemicals. Read more »
Above ground storage tanks are subject to corrosion. The bottoms of these storage tanks are especially vulnerable. Not only do soluble salts and chemicals settle to the bottom of the tank to damage the internal surface, but the external surface can be damaged by salt water, soil and other contaminants. The solution used to be replacing the bottom of the tank, which is expensive and time-consuming. Another option is to make FRP tank liner repairs, coating the tank with a fiberglass reinforced plastic lining (FRP) that is considered a secondary bottom. It’s almost like a tank liner, but it’s sturdy and durable to give you another 10 to 20 years out of your tank. Read more »
Fiber Reinforced Plastic (FRP) is widely used in many industrial applications. FRP refers to a composite material, a plastic (polymer) matrix that has been reinforced with glass fibers which in combination result in a material that is exceptionally strong but also flexible. FRP materials are used in products and components that must be precisely engineered with tight tolerance limits, a low fatigue index, and high impact tolerance. FRP ducts, piping, and FRP tank liners are examples of excellent FRP applications. Read more »
Domestic water tanks can solve many problems, including having water on hand for fire protection or for general use. PICON, Inc fabricates tanks and repairs and replaces tank linings with an emphasis on fiber reinforced plastic tanks and tank linings. If you’re looking for a commercial domestic water tank Bay Area, learn more about the different types of domestic water tanks to understand you have more options to fit your needs. Read more »
Serving the Bay Area & Northern California for over 35 Years
You must be logged in to post a comment.